Paid Advertisement

Paid Advertisement

Heat Pump and Gas Heat

We can't find products matching the selection.

Especially for those with limited space in which to store their HVAC units, a packaged unit can be fairly beneficial due to its spatially efficient design. Package units are located either on the roof or on the side of a building, and they house a number of combined HVAC systems, like the packaged air conditioners that include a compressor, coils and air handler, the packaged heat pumps that contain a heat pump and often a electric heat strip, a packaged gas-electric unit that combines an air conditioner with a gas-powered furnace, and a packaged dual-fuel unit that contains a heat pump and a gas furnace. There are no indoor components of this central air system. 

Wholesale Furnace Package Units Buying Guide

In order to pick out the best heat pump and gas heat package unit (heat pump and gas furnace), you’ll first need to calculate the square footage of the space that you’re trying to cool. Typically, the average home requires one ton of air conditioning per 400 to 1,000 square feet. There is a lot of variation in this number since you’ll also need to factor in how many windows the space has and how tall the ceilings are, as these things dictate how easily air flows through your space. 

After you have discovered what tonnage will work best for your space, you will then move on to figure out what SEER, or Seasonal Energy Efficiency Ratio, you want your new unit to possess. Essentially, the SEER rating measures the air conditioner's efficiency, which is calculated using the cooling output for a typical cooling season divided by the total electric energy input during the same time frame. Similar to the miles per gallon for a car, an air conditioner's SEER rating is the maximum efficiency rating for the unit. So, the higher the SEER rating, the more efficient the air conditioner will be, likely resulting in lower utility bills and other added benefits. However, it is also important to note that the efficiency of your air conditioning system can also depend on the size of the space you're attempting to cool, your current ductwork, and other variables.

Here is how to find the proper tonnage for your gas furnace:

Warmest climates: 30-35 BTUs per square foot

Warm climates: 35-40 BTUs per square foot

Mild climates: 40-45 BTUs per square foot

Cold climates: 45-50 BTUs per square foot

Coldest climates: 50-60 BTUs per square foot

You’ll need to decide which orientation you’d like to choose for your gas furnace. We offer downflow horizontal or upflow horizontal models. Upflow furnaces are often installed in the basement or in the closet, where the ductwork is located above the level of installation. Contrarily, downflow systems are installed in crawl spaces or in areas where the ductwork is below the level of installation.

You also have the option to choose between a “standard efficiency” gas furnace system or a “high efficiency” gas furnace system. On our site, “standard efficiency” stands for gas furnace systems that are 80% efficient and “high efficiency” gas furnace systems are those that are 92% efficiency or higher. 

Disclaimer: Before making a purchase, you should always check first with your qualified installer to figure out what unit is best for your home or space.

Paid Advertisement

© 2019 The Factory Furnace Outlet