Especially for those with limited space in which to store their HVAC units, a packaged unit can be fairly beneficial due to its spatially efficient design. Package units are located either on the roof or on the side of a building, and they house a number of combined HVAC systems, like the packaged air conditioners that include a compressor, coils and air handler, the packaged heat pumps that contain a heat pump and often an electric heat strip, a packaged gas-electric unit that combines an air conditioner with a gas-powered furnace, and a packaged dual-fuel unit that contains a heat pump and a gas furnace. There are no indoor components of this central air system.
You have chosen the 4 ton Goodman air conditioner. Typically, this unit will work best for those with a square footage of 2,101 to 2,500 in the warmer sections of the United States (like the southern portion of the United States). If you live in a milder or colder climate, a 4-ton unit will best serve those with a square footage of 2,201 to 2,700, with the largest square foot allowance being for those who live in the coldest climates in the United States.
After you have discovered what tonnage will work best for your space, you will then move on to figure out what SEER, or Seasonal Energy Efficiency Ratio, you want your new unit to possess. Essentially, the SEER rating measures the air conditioner's efficiency, which is calculated using the cooling output for a typical cooling season divided by the total electric energy input during the same time frame. Similar to the miles per gallon for a car, an air conditioner's SEER rating is the maximum efficiency rating for the unit. So, the higher the SEER rating, the more efficient the air conditioner will be, likely resulting in lower utility bills and other added benefits. However, it is also important to note that the efficiency of your air conditioning system can also depend on the size of the space you're attempting to cool, your current ductwork, and other variables.
However, before making a purchase, you should always check first with your qualified installer to figure out what unit is best for your home or space.
Disclaimer: Before making a purchase, you should always check first with your qualified installer to figure out what unit is best for your home or space.