This Goodman 1200 CFM Multi Position Electric Modular Blower has been cosmetically damaged during shipping. Please review all provided pictures prior to purchase.
Scratch and Dent equipment comes with the Manufacturer's warranty on all working parts. Buyer is responsible for reviewing condition of item(s) at the time of purchase.
Damage description:The right panel across the bottom of the unit has a major dent. The back panel on the left edge has two dents. The left panel on the right bottom corner has a dent. the blower is detached and the insulation is ripped internally.
Please call for more information.
The Goodman MBR1200AA-1 Multi Position Electric Modular Blower cabinet is easily configured for horizontal or vertical, upflow or downflow installations. The MBR1200AA-1 model Air Handlers do NOT have a built in Evaporator Coil.
• Direct drive, multi-speed PSC blower motor
• Cooling or heat pump applications:
upflow, downflow, and horizontal
• Blower section usable as an electric furnace
• Control board includes a fan delay in the cooling
mode and is isolated from the air stream
• Intended for use with CAPF/
CHPF cased evaporator coils
• CAPF/CHPF coils are equipped
with a check flowrater
• AHRI certified; ETL listed
• Painted, galvanized steel cabinet
• Horizontal or vertical configuration capabilities
• 21" depth for easier attic access
• Foil-faced insulation is glued in place and covers
the entire blower case to reduce operating
sound and cabinet condensation
• Galvanized, leather grain-embossed finish
• 3 kW – 21 kW electric heat kits available
• Cabinet air leakage less than 2% at 1.0 inch H20 when
tested in accordance with ASHRE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H20
when tested in accordance with ASHRE standard 193