Site Information

 Loading... Please wait...
We are offering Free Delivery with Free Liftgate service on any orders of $95.00 or more.


Mascot FT Residential Tankless 199MBTU Water Heater Model MSTWW199NA1XX

Mascot FT Residential Tankless 199MBTU Water Heater Model MSTWW199NA1XX

Sale Price:



Product Description

Mascot® ST Tankless Water Heater
High Efficiency Tankless Water Heater
The Mascot ST is a cascadable high-efficiency wall-mounted tankless water heater packed with features that easily satisfy the hot water needs of the modern home. Within the Mascot ST is an advanced stainless steel condensing heat exchanger that delivers a quick response and exceptional efficiency. When there is a need for hot water, the Mascot ST immediately begins to produce hot water, running for as long as you need it to make sure you never run out of hot water. It’s a very efficient and responsive system that will take care of your family’s hot water needs with years of reliable service. The Mascot ST will run for as long as there is demand, producing 5.0 gpm (19 l/m) at a 77F rise!

Mascot ST Tankless Water Heater (Size Range: 199MBH) – Indoor

0.96 Energy Factor: Ultra-High Efficiency
10:1 Modulation: For small to large hot water demands
199,000 BTU/Hr: Ample hot water for the whole family
Environmentally Friendly Low NOx Emissions
Reliable Stainless Steel Condensing Heat Exchanger
Vent up to 100 ft. in PVC, CPV & Polypropylene
Cascadable up to 18 total units (up to 3.6 MBTU/h)
Saves You Money

Greatly reduce water heating bills when compared to older, low–efficiency water heaters! A 0.96 energy factor equals lower fuel use. In older conventional tankless water heater designs, the heat trapped in the flue gas goes up the chimney instead of heating your water.

Our technology releases the heat stored inside the exiting flue gas to reach ultra-high efficiencies. Potentially saving thousands of dollars in water heating bills over the life of this condensing tankless water heater!

When the flue gas contacts the Mascot ST stainless steel heat exchanger it begins to condense, releasing stored heat
The heat released by condensing is combined with the heat from the burner flame
The result is the majority of the available heat is transferred to your home–up to 30% more energy verses older low–efficient designs– saving you money
Rebate Eligible–check federal, state, and local rebates for upfront savings!

An Outdoor Installation Kit is available for new installations where the only available place to install the unit, is outside.

Product Reviews

Find Similar Products by Category